This is the ultimate LCG kit on the market for the Losi Exotek case. It features a 8mm transmission raise, low profile shock tower, repositioned motor plate with ability to run up to a 112t spur gear, and all hardware included!
 
Drop Down Motor Plate: Made of 4mm carbon fiber and dropped to the chassis floor. This motor plate also has longer slots to fit large spurs up to 112T. There is a recessed section for using slipper eliminators without shims/washers. For 13.5/VXL racing you will need to go bigger on both pinion and spur to make up the larger gap. 
 
Low Profile Shock Tower: Made of 4mm carbon fiber and lowered to keep the shocks from lifting with the transmission. This is the best balance of shock position and shock height. Rear buggy shocks, front buggy shocks, or similar will work with correct limiting. Front 36mm buggy shocks will not require limiting.
 
Transmission Riser: Includes 8mm riser. These are 3D printed with solid walls around each thru hole and printed in a high strength carbon infused material. Each piece gets inspected and deburred if necessary to insure proper flatness and quality. These are not like the typical cheapo 3D printed parts on the market.
 
 
OPTIONS:
 
FLAT SPACER: Required for all flat style chassis such as Bullet, Undercover, etc.
 
RDESIGN SPACER: Required for using Rdesign mount. MUST use standup transmission V2 mount. (https://www.amainhobbies.com/rdesign-22-stand-up-transmission-wheelie-bar-mount-v2-black-rdd421/p1356005)
 
 
SEPERATE OPTIONS:
 
JSRC BRASS RISER: https://www.jsracingconcepts.com/product-page/22-3-0-4-0-5-0-brass-lcg-transmission-riser-8mm
 
 
Shock Tower Mounting Diagram:
 
Blue: Standard vertical shock mounting
Red: Laydown shock mounting for improved LCG and quicker weight transfer
Green: RDesign mounting hole
Pink: Mounting to transmission case
Yellow: Standard wing mount pattern
Dark Red/Maroon: Floating body mount mounting